How and How Long:
- Using ammonia-based cleaner, wipe down pots to remove any dust or particles. If the plastic is new, wipe down with paint thinner for best results.
- When dry, apply 2 to 3 coats of Satin Twilight, Honeydew, or Buttercream. Let dry between coats.
- When completely dry, position stencil with repositionable adhesive. Mask off outside edges and other areas with masking tape and kraft paper to protect from overspray.
- Apply 2 light coats of your selected accent color from the palette. Let dry completely between coats. Remove kraft paper, stencil and tape.
- Repeat steps 4 and 5 as often as necessary to complete your design.
- Fusion dries in 15 minutes of less, and can be handled in about 1 hour. Fusion must cure a full 7 days to become fully chip and scratch resistant.
Approximate project time: 2 hours.
|